Q: do you ship to california?

Asked by: jon - 5/21/2024
No Answers have been submitted yet.

Q: Can this item be shipped to California?

Asked by: Ronald Simien - 5/3/2024
No Answers have been submitted yet.

Q: Is the "BLACK EP80-2", for a AR10 build?

Asked by: Bert - 4/12/2024
No Answers have been submitted yet.

Q: Can you ship to Oregon?

Asked by: Mike Crounse - 3/22/2024
No Answers have been submitted yet.

Q: Is this a 9mm?

Asked by: Marshall Jenkins - 3/12/2024
No Answers have been submitted yet.

Q: Do you still sell the multiple packs of the receivers?

Asked by: RT - 1/6/2024
No Answers have been submitted yet.

Q: can this be shipped to maryland? I lost track of what has changed over the years.

Asked by: me - 12/27/2023
No Answers have been submitted yet.

Q: What manufacture magazine and capacity does it take.

Asked by: Mark - 12/27/2023
No Answers have been submitted yet.

Q: is it a308 lower?

Asked by: Daniel E james - 12/18/2023
No Answers have been submitted yet.

Q: What is this one a AR15 or AR10 I need a AR10

Asked by: Scott Gordon - 11/2/2023
No Answers have been submitted yet.

Q: What year was the Kevlar first used ?and beforehand what materials were used on the original polymer lowers ar15 and ar9 to make sure they were reinforced in the buffer tube area?

Asked by: Blackrain warrior - 10/14/2023
No Answers have been submitted yet.

Q: Can you put these in a regular jig , like the ones to mill out aluminum recievers?

Asked by: Bruce - 9/6/2023
No Answers have been submitted yet.

Q: Ho is there video on this item

Asked by: G - 7/20/2023
No Answers have been submitted yet.

Q: Is this 80% ar 9 polymer?

Asked by: Darrell - 7/20/2023
No Answers have been submitted yet.

Q: Do these come with a jig or do i need to purchase one?

Asked by: Jim - 7/16/2023
No Answers have been submitted yet.

Q: Do you ship 80% Ar15 lowers to California?

Asked by: liz - 6/8/2023
No Answers have been submitted yet.

Q: Which 9 mm Lower do I get with the Glock mag release?

Asked by: Marc Nelson - 5/31/2023
No Answers have been submitted yet.

Q: How well will these work for other calibers? I see other manufactures have added "multi-caliber" stamps to their lowers and I am wondering if that is just a gimmick. I want to build a 7.62x39 and have a couple of these. Love these by the way - been really happy with my stock AR.

Asked by: Cian - 5/17/2023
No Answers have been submitted yet.

Q: Not very good reviews on youtube, but all older. Have you had any problems in the past few years. The main complaint has been with the takedown pin holes. Thanks for any info Rick

Asked by: Rick Horton - 4/24/2023
A: Previously I had seen issues but over the past few many years all is good to go and functions flawlessly.
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: Are your 80% Lowers compatible with 80% Arms Jen 3 Jig?

Asked by: DENNIS FALAN - 4/22/2023
A: Many builders have used many jig platforms over the years
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: The AR9 is buy one get one. If I order this and order the mag release do I get one for each or do I have to order another for the second (free) one?

Asked by: Steve Nickeson - 3/25/2023
A: This is not an AR9 this is a 15 receiver build
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: I am not sure if I am ordering an ar9 or and ar15. I want the 9 (x2 for the $29.99 buy one get one free.) and when I order the mag release do I get two on the buy one get one. I want at least two. This is confusing. I believe the mag release is different from the ar15. ????

Asked by: Steve Nickeson - 3/25/2023
No Answers have been submitted yet.

Q: Are these receivers aluminum or polymer

Asked by: earl Carter - 2/22/2023
A: Long strand kevlar
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: Will this receiver work with 350 legend?

Asked by: Shane Miller - 2/5/2023
A: yes
Was this answer helpful?  2 of 2 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: I'm in Hawaii will this item ship to me?

Asked by: calvin ahnee - 1/23/2023
No Answers have been submitted yet.

Q: Would this item be shipped to my address?

Asked by: calvin ahnee - 1/21/2023
A: yes
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: cart says save for later . will not check out? ED

Asked by: edward Vieira - 1/10/2023
No Answers have been submitted yet.

Q: Will this acccept glock magazines

Asked by: Brent Barnes - 1/1/2023
A: This is for a AR15 not a AR9mm
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: I didn’t see any mention of the extractor on the AR9 80% kit. Is this part sold separately? Thank you!

Asked by: David Bradley - 12/24/2022
No Answers have been submitted yet.

Q: Do you ship to California

Asked by: Anthony Souza - 12/22/2022
A: Currently Ca is on the no go list.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: EP80 - 2 is this just for pistol calibers like 9mm or 40 s&w OR can I build a 5.56 caliber rifle on this lower? I assume someplace on your site I can order a jig , say at a later date or different package?

Asked by: Tim R. Gapen - 12/21/2022
No Answers have been submitted yet.

Q: still legal in ga?

Asked by: Barbara chadwick - 12/1/2022
A: yes,
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Faylin (4/24/2023)

Q: Would you ship to Connecticut?

Asked by: Louie - 11/27/2022
No Answers have been submitted yet.

Q: Hi have two of these Black EB 80 and shooting them both broke right at the break down pin hole the upper receiver . Is there a reason for this? Ar these just for the 22 caliber..

Asked by: jerry rininger - 11/24/2022
No Answers have been submitted yet.

Q: Do I need an NFL dealer to buy this receiver?

Asked by: Milt - 11/11/2022
No Answers have been submitted yet.

Q: Can these polymer lowers be milled using a 5D tactical Router jig system?

Asked by: Jim T - 9/17/2022
No Answers have been submitted yet.

Q: Where can I get a cheap jig for the EP80 lower?

Asked by: Roosevelt Adkins - 9/16/2022
No Answers have been submitted yet.

Q: Where do I find the jig sticker after purchase?

Asked by: Jason - 9/12/2022
No Answers have been submitted yet.

Q: Can this still be shipped to Arizona?

Asked by: David - 9/5/2022
No Answers have been submitted yet.

Q: I have one of these lowers. The modulus arm jig part that screws In to the buffer tube will not thread into it. Does it require a special part. Also my standard buffer tube does not want to screw In either. Can you help me with this please. Thank you.

Asked by: Jeff - 9/3/2022
No Answers have been submitted yet.

Q: Does it come with the jig to mill it and fill it???

Asked by: Grimey - 8/17/2022
No Answers have been submitted yet.

Q: Are the polymer lowers mil spec? Will you have the jigs for the polymer and aluminum ar lowers available?

Asked by: Daniel Reyes - 8/17/2022
No Answers have been submitted yet.

Q: I placed and paid for it with my debit card . It was suppose to be delivered in 3 to 4 days that was a month ago I would like to know what is your problem Thanks Roger Chaffee

Asked by: Roger Chaffee - 5/2/2022
A: According to our records your order has been shipped and according to USPS your order has been received. Delivered April 29, 10:18AM Please call the office if
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: C. Cook (5/4/2022)

Q: What can I do to help resolve the problem

Asked by: Roger Chaffee - 5/2/2022
No Answers have been submitted yet.

Q: When can I expect an answer??

Asked by: Roger Chaffee - 5/2/2022
A: We have tried reaching out to you with the # provided for your order. It shows shipped and received. Please c all the office if you have any further questions
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: C. Cook (5/4/2022)

Q: Just want to touch base and see if you all are currently shipping 80% lowers, I've been scammed before and just want to check before I buy

Asked by: Alvin nichols - 4/21/2022
No Answers have been submitted yet.

Q: Hi i wanted to know how many lowers are you able to buy? i do not know if its restricted by 10 lowers a person or if i can add more to my cart before checking out!

Asked by: BIG SLONG MIKE - 4/15/2022
A: You can order as many as you like.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Chris C. (4/15/2022)

Q: Hi, on your Gen 2 Polymer AR15 lower I don't see where you can install the standard bolt catch. What am I missing? Thanks

Asked by: Diana Dyckman - 4/15/2022
A: The Ep80-2 has the bolt catch lock near the magazine bar release on the left side of the lower receiver.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: VC (4/15/2022)

Q: Just sent a question about the bolt catch location. Never mind. It's on the left. Needless to say we're new to the AR. Sorry

Asked by: Diana Dyckman - 4/15/2022
A: No worries if you have any more question let us know.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: VC (4/15/2022)