Q: Once put together trigger pulls but no fire. If the pin at the bottom of the bcg 'buffer' (the necessary one form lower removal) is off the buffer will move down and the trigger will fire. Do I need to decrease the diameter of the roller? Or something else. Thanks, N

Asked by: Nic - 3/22/2026
No Answers have been submitted yet.
Submit an answer

Q: Do ya carry Kriss vector gen 3 10mm frt ?

Asked by: Shelton Davis - 2/25/2026
No Answers have been submitted yet.
Submit an answer

Q: Is FRT a Three Position

Asked by: Brett Wade - 2/19/2026
No Answers have been submitted yet.
Submit an answer

Q: In one of the reviews, the person had a Vector Gen 2 9mm & installed it & at first it would not run but then he contacted your customer service and you helped him get it to work. What did you tell him to make it run correctly? Thinking about getting the exact same set up. Thanks in advance.

Asked by: JP - 1/14/2026
A: There are a few different things we go over upon a customer call in. It varies just like the guns do. Fitment, polishing, etc and we make sure to have them go over to the blog to assure they have made the appropriate adjustments that are needed.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (1/14/2026)
Submit an answer

Q: Hey I talked with Chris about my kriss and I polished the holes and around the bolt head and had to end up filling a little off because the bolt screw was hitting the plastic on the bottom. I got it all together and I put one round in and it shot fine. I put 2 rds in and shot both so then I put a full mag in it and it shot about half of it like it should very fast! And then started single shooting again and half of the plastic pc fell out of the bottom of the gun. It worked and then broke in half. What would cause that and could the part be made from hard nylon or with aluminum, brass softer metal? The Ar trigger worked great and will be buying more of them!!

Asked by: Brian - 1/9/2026
A: Hello Brian, reach out to Chris again and I am sure he can get you going again. Thanks again and have a great day
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (1/14/2026)
Submit an answer

Q: Are any of these options compatible with the .22LR version of the KRISS Vector? And if not are there plans for one?

Asked by: Tony - 1/7/2026
A: No options for the 22lr version yet. Unsure if we will
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (1/14/2026)
Submit an answer

Q: Do you ship this to all states? If not, which states do you NOT ship to? Thank you.

Asked by: Elroy - 12/28/2025
No Answers have been submitted yet.
Submit an answer

Q: How do I intall the frt for my kriss vector gen 2 the youtube video has been taken down

Asked by: Simon Lowther - 12/27/2025
No Answers have been submitted yet.
Submit an answer

Q: I have the gen three Kris’s vector 45. What screw and how to install it it doesn’t fit under the rail and if i go through the to of the pic rail its not long enough

Asked by: James - 12/26/2025
No Answers have been submitted yet.
Submit an answer

Q: So what are the 2 positions

Asked by: John Redmond - 12/23/2025
No Answers have been submitted yet.
Submit an answer

Q: I purchased one of these kits and am having some issues. It works fine as long as the weapon is in 2 halves but once I put the upper and lower together it will not function at all. The bolt carrier seems to make contact with the roller.

Asked by: Robert Martin - 12/19/2025
A: Hello Robert, have you checked the blog here on the website for installation instructions? We also have a link to a video for reference. At anytime you can call as well to have a gunsmith go over fitment and such. Thanks and have a great day
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/20/2025)
Submit an answer

Q: Can I purchase this item if I live in Florida?

Asked by: Aaron Daria - 12/16/2025
No Answers have been submitted yet.
Submit an answer

Q: this is frt trigger ?

Asked by: HUA - 12/7/2025
No Answers have been submitted yet.
Submit an answer

Q: Is this a true forced reset for a Ventor 9MM

Asked by: Dakota Dunne - 12/5/2025
A: Yes
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/5/2025)
Submit an answer

Q: Would this work with a 3 position selector?

Asked by: Ianraps - 12/4/2025
A: Not currently. There are 3 position selectors that are 3d printable but nothing from us yet to actually make it 3 position.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/5/2025)
Submit an answer

Q: Is this a super safety and is it 3 position? Thanks

Asked by: Mike - 12/4/2025
A: This is a 2 position FRT for (Safe and Fire/BRRRT). We are unaware of a 3 position on the market currently that functions like a AR for the Kriss Vector. Actively working on a design though for another 3 position selector.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/5/2025)
Submit an answer

Q: Just wondering if my vector will still run in semi auto after Brrt install. Gen 2 45acp. Thank you

Asked by: Brandon Proctor - 12/3/2025
A: This is a 2 position FRT for (Safe and Fire/BRRRT). We are unaware of a 3 position on the market currently that functions like a AR for the Kriss Vector. Actively working on a design though for another 3 position selector.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/5/2025)
Submit an answer

Q: Im just curious on what is being sold. is it similar to the ratlr and can it be swapped from semi to frt

Asked by: Landon - 12/3/2025
A: This is a 2 position FRT for (Safe and Fire/BRRRT). We are unaware of a 3 position on the market currently that functions like a AR for the Kriss Vector. Actively working on a design though for another 3 position selector.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/5/2025)
Submit an answer

Q: My gen 2 won’t fire unless the one buffer spring take down pin is out. And with it out the gun obviously doesn’t work. why might this be.

Asked by: Zachary James Miller - 12/2/2025
A: I found that my safety spring came out of place when I installed the parts. I called in and spoke to one of the guys at EP and they walked me through it. Be sure to polish all the parts they describe and to lubricate well including the frt roller. The first couple of mags the trigger was stiff but once broken in it screams now.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Kevin (12/2/2025)
Submit an answer

Q: Is this legit like “upgraded binary trigger” and how long will it be delivered

Asked by: Mason Teague - 12/1/2025
A: Yes it is legit and we are shipping daily
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/2/2025)
Submit an answer

Q: How to install? Video link?

Asked by: Jon - 12/1/2025
A: Install video link is in the description of this item Step by step is in the blog
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/2/2025)
Submit an answer

Q: I purchased this. Where are the unstallation instructions?

Asked by: Michael Godzilla - 11/30/2025
A: Video link is in the item description as well as blog.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/2/2025)
Submit an answer

Q: Is this a 3 position FRT for the Kriss Vector

Asked by: Edward Reyes - 11/27/2025
No Answers have been submitted yet.
Submit an answer

Q: is this adaptation legal with atf or is it nfa

Asked by: enforcer 3-1a - 11/26/2025
A: Legal in most states and is not NFA
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/2/2025)
Submit an answer

Q: Ordered this a week ago came with an m4 sticker I believe it is but it had two plastic pieces in it and two screws well the first one after installing shot out my ejection port in two pieces did it exactly as instructed and there's no videos pictures or anything to double check things and my vector is about 3 or 4 years old so nicely broken in I didn't even pop a round off and it broke that piece in half scared this thing will blow my hand off in live fire so what can I do about this

Asked by: Mark Horner - 11/26/2025
A: Hello , we have installation instruction in the video linked in the description as well as step by step in the blog via the website. If yours broke reach out to us and we will replace the parts.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (12/2/2025)
Submit an answer

Q: If I have a gen 1 that has the updated gen 2 fire control group which Frt do I select?

Asked by: Eric Adams - 11/18/2025
A: GEN 2
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: It the FRT ready for sale yet? I'm the gunsmith for onpoint range in Raleigh NC and if you need a test and evaluation site we're open for consideration

Asked by: Dakota Dunne - 11/16/2025
No Answers have been submitted yet.
Submit an answer

Q: Looking at your video but it doesn't look like a frt

Asked by: Danny Salinas - 11/13/2025
No Answers have been submitted yet.
Submit an answer

Q: Does this work with Gen 3 vectors?

Asked by: Oliver French - 11/12/2025
A: YES
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: Tried to order once it said in stock, clicked add to cart and it said out of stock.

Asked by: Alex - 11/12/2025
A: It is in stock and shipping
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: Does this BRRT drop into a gen 2 vector?

Asked by: CODA - 11/12/2025
A: yes
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: Is there a difference in Gen 1 and Gen 2, I think my vector is gen 2

Asked by: Cain Cooklin - 11/12/2025
No Answers have been submitted yet.
Submit an answer

Q: Will this work with my gen 2 9mm? Do I need any modifications for the brrrt to run properly?

Asked by: Jon - 11/12/2025
A: Yes, we have video of the gen 2 9mm running on our social media
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: When will the brrrt be back in stock, received and email at 4 a.m. notifying me there back in stock by 6 a.m. they were sold out.

Asked by: Jon - 11/12/2025
No Answers have been submitted yet.
Submit an answer

Q: I just got an email saying this was back in stock, the browser is saying out of stock

Asked by: Austin Drake - 11/12/2025
A: In stock and shipping
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Got an email saying was back in stock. I want to order one but the website says out of stock. How do I order?

Asked by: William Godak - 11/12/2025
A: In stock and ready to order
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: I got a email saying these are in stock but they arnt Id like to buy a few of them at this price if you could get back to me Id appreciate it.

Asked by: jordan - 11/12/2025
A: They are back in stock and shipping
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: When are you expecting this trigger to be back in stock?

Asked by: Michael Greene - 11/12/2025
A: In stock and shipping 11/19/2025 @ 4:49pm
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Is the Kriss Vector FRT 3d printed or metal?

Asked by: Rob - 11/12/2025
A: Resin based.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Does this come with a 3 position selector for safety semi and the frt?

Asked by: Logan Williams - 11/12/2025
A: 2 position
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: will this work on gen 2 45 cal kriss vector

Asked by: thomas worley - 11/12/2025
A: Yes
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Is this 3dp or metal?

Asked by: Hunter - 11/11/2025
A: Resin based
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: does this work with all models as far as gen 2 and 3. And does it work with all calibers?

Asked by: Zak - 11/11/2025
A: Yes, all but 22lr
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: is the safety 3 position?

Asked by: Joseph R Bowser - 10/31/2025
A: 2 position only, easily removed and installed
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
A: 2 pos
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Is this for the gen 3? Is it a 3 pos?

Asked by: Creo - 10/31/2025
A: Gen 3 yes, 2 position
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/21/2025)
Submit an answer

Q: How long before they are in stock.

Asked by: John Ellington - 10/31/2025
A: In stock and shipping 11/19/2025 @ 4:49pm
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Gib vector brrrt trigger nao sirs. Please.

Asked by: DShow84 - 10/30/2025
A: In stock and shipping 11/19/2025 @ 4:49pm
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Will you be shipping to michigan?

Asked by: Alexander - 10/30/2025
A: Michigan has laws against selling, shipping and possession of FRT. Not at the moment
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: How long of a wait?

Asked by: Jacob Garcia - 10/26/2025
A: In stock and shipping 11/19/2025 @ 4:49pm
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: What is the time frame for these to be back in stock?

Asked by: Michael Jones - 10/22/2025
A: In stock and shipping 11/19/2025 @ 4:49pm
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Will this trigger work on all gen 2 Kris’s vectors I have the10 mm rifle carbine

Asked by: Thomas Moccio - 10/17/2025
A: Yes, all caliber other than the 22lr
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Will this work on a 1st generation in 45ACP?

Asked by: Beef - 10/16/2025
A: Yes, but we do recommend upgrading to the gen 2 FCG. The gen 1 has a horrible trigger and is difficult to run flawless
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Just curious, will this be a 3 position (Safe/Semi/FRT) or just Safe/FRT?

Asked by: Mike Cathey - 10/16/2025
A: 2 pos only. Easy to install and remove
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: When will it be available roughly? And does it work on the 9mm with minimal jams?

Asked by: Nathen funk - 10/15/2025
A: In stock and shipping 11/19/2025 @ 4:49pm. Runs great check out the videos on our social media
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: Does this drop into a 10mm vector?

Asked by: Dre - 10/12/2025
A: Yes, all calibers other than the 22lr
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer

Q: What do the parts look like and is there an install video?

Asked by: Orlando Gonzales - 10/12/2025
A: We have directions to install on our blog via the website.,
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: EP (11/19/2025)
Submit an answer